“Popcorn Hour A-100”的版本间的差异

来自IPTV爱好者
跳转至: 导航搜索
(新页面: == 启动信息 == / # dmesg Linux version 2.6.15-sigma (ctliew@xeon4x) (gcc version 4.0.4) #3249 PREEMPT Mon Mar 14 17:38:04 MYT 2011 Configured for SMP8634 (revision ES6/RevA), dete...)
 
(没有差异)

2011年9月25日 (日) 08:26的最新版本

启动信息

/ # dmesg
Linux version 2.6.15-sigma (ctliew@xeon4x) (gcc version 4.0.4) #3249 PREEMPT Mon Mar 14 17:38:04 MYT 2011
Configured for SMP8634 (revision ES6/RevA), detected SMP8634 (revision ES9/RevC).
SMP863x/SMP865x Enabled Devices under Linux/XENV 0x48000000 = 0x00023efe
 BM/IDE PCIHost Ethernet IR FIP I2CM I2CS USB PCIDev1 PCIDev2 PCIDev3 PCIDev4 SCARD
Valid MEMCFG found at 0x10000fc0.
CPU revision is: 00019069
Determined physical RAM map:
 memory: 05ee0000 @ 10020000 (usable)
On node 0 totalpages: 89856
  DMA zone: 89856 pages, LIFO batch:15
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
Built 1 zonelists
Kernel command line:
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 2048 (order: 11, 32768 bytes)
Using 148.500 MHz high precision timer.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 86400k/97152k available (3390k kernel code, 10652k reserved, 653k data, 3236k init, 0k highmem)
Calibrating delay loop... 291.84 BogoMIPS (lpj=145920)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
tangox: creating TLB mapping for 0x20000000 at 0xc0000000, size 0x08000000.
PCI: Initializing SMP863x/SMP865x PCI host controller
PCI: Remapped PCI I/O space 0x58000000 to 0xc8020000, size 64 kB
PCI: Remapped PCI config space 0x50000000 to 0xc8004000, size 10 kB
PCI: Configured SMP863x/SMP865x as PCI slave with 128MB PCI memory
PCI: Region size is 16384KB
PCI: Map DMA memory 0x10020000-0x15f00000 for PCI at 0x11000000
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Created /proc/cpucache_info entry.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/O].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
SMP863x ir (254:0): driver loaded (wait_period = 200ms, buffer_size = 6)
SMP863x fip (253:0): driver loaded (buffer_size = 2)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A
loop: loaded (max 8 devices)
tango2_enet: ethernet driver for SMP863x internal mac
tango2_enet: detected phy at address 0x01
tango2_enet: mac address 00:00:00:00:00:00
libata version 1.20 loaded.
physmap flash device CS2: 400000 at 48000000
CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
CS2: mymtds[cs]->size 2000000 f_sizes[cs] 400000
CS2: flash size mismatched, re-do probing/initialization.
physmap flash device CS2: 2000000 at 48000000 (remapped c8080000)
CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
CS2: Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
add_mtd_device first cs 2 es 020000 sz 2000000 esregion 1 000000 020000
Using physmap partition definition
MTD CS2-Part1 (offset:0x0, size:0x20000)
MTD CS2-Part2 (offset:0x20000, size:0x20000)
MTD CS2-Part3 (offset:0x40000, size:0x40000)
MTD CS2-Part4 (offset:0x80000, size:0x360000)
MTD CS2-Part5 (offset:0x3e0000, size:0x20000)
MTD CS2-Part6 (offset:0x0, size:0x0)
Adding partition #1-#6
Creating 6 MTD partitions on "CS2: Physically mapped flash":
0x01fe0000-0x02000000 : "Setting 1fe0000"
0x001e0000-0x01fe0000 : "Kernel 31457280"
0x009e0000-0x01fe0000 : "App 23068672"
0x00080000-0x01fe0000 : "Recover Kernel 32899072"
0x00040000-0x00080000 : "Yamon"
0x00000000-0x00040000 : "Zboot"
physmap flash device CS3: 4000000 at 4c000000
CFI: Found no CS3: Physically mapped flash device at location zero
driver tangox-ehci-hcd, 10 Dec 2004
TangoX USB initializing...
tangox-ehci-hcd tangox-ehci-hcd: TangoX USB 2.0
tangox-ehci-hcd tangox-ehci-hcd: new USB bus registered, assigned bus number 1
tangox-ehci-hcd tangox-ehci-hcd: irq 48, io mem 0xa0021500
tangox-ehci-hcd tangox-ehci-hcd: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
TangoX USB was initialized.
Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=47
tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned bus number 2
tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using tangox-ehci-hcd and address 2
Initializing USB Mass Storage driver...
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 3236k freed
usb 1-1.1: new low speed USB device using tangox-ehci-hcd and address 3
input: Darfon USB Combo Keyboard as /class/input/input0
input: USB HID v1.00 Keyboard [Darfon USB Combo Keyboard] on usb-tangox-ehci-hcd-1.1
input: Darfon USB Combo Keyboard as /class/input/input1
input: USB HID v1.00 Device [Darfon USB Combo Keyboard] on usb-tangox-ehci-hcd-1.1
usb 1-1.2: new high speed USB device using tangox-ehci-hcd and address 4
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
llad: module license 'LGPL' taints kernel.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: SMP863x/SMP865x Bus Mastering IDE controller
Probing IDE interface ide0...
tntfs: no version for "struct_module" found: kernel tainted.
Tuxera NTFS driver 3010.8.6 [Flags: R/W MODULE].
arusb - version 3.2.0.17
usbcore: registered new driver Otus
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
mumk_register_tasklet: (0) tasklet c800c000 status @ce424764
  Vendor: WinSome   Model: Flash Disk        Rev: 5.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 520064 2048-byte hdwr sectors (1065 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 520064 2048-byte hdwr sectors (1065 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sda1.
TNTFS error (device sda1, pid 863): read_ntfs_boot_sector(): Primary boot sector is invalid.
TNTFS error (device sda1, pid 863): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
TNTFS error (device sda1, pid 863): ntfs_fill_super(): Not an NTFS volume.
HFS+-fs: unable to find HFS+ superblock
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ir: Enable NEC decoder (0x00000000)
ir: Enable RC5 decoder (0x80000000)
ir: Enable RC6 decoder
/ #

分区信息

  1. cat /proc/partitions
major minor  #blocks  name

  31     0      32768 mtdblock0
  31     1        128 mtdblock1
  31     2      30720 mtdblock2
  31     3      22528 mtdblock3
  31     4      32128 mtdblock4
  31     5        256 mtdblock5
  31     6        256 mtdblock6